9. Cable Management

Step #09b - Connecting the Z-axis Cables

List of Components

ItemSpecQty (S/M/L)
 Motor cable (blue)570cm1
 Sensor cable (blue)580cm1
 VFD Spindle cable-1

Tools needed

-

Instructions

  1. Connect each cable respectively to the motor, sensor and then spindle.
    1. The motor and sensor cables for the Z-axis are blue.
      1. Bundle the 3 cables together and place them inside the X-axis cable chain.
        1. Close all the bridges one by one.

          Drawing

          Leave a little slack on the cables so that they are not too taut, especially on the spindle cable since it has to be able to move up and down.