9. Cable Chain Management

Step #02 - Attaching the X-axis Cable Tray

List of Components

ItemSpecQty
 Cable tray1400mm1
 Cable chain holderSteel 3mm2
 DIN912 screwM6x124
 Cable tie-4

Tools needed

-

Instructions

  1. Use 4 screws to attach 2 cable chain holders at the back of the X-axis, using the 4 sliding nuts that you pre-placed in the bottom slot of the aluminium profile. They should be both facing down.
    1. Place the cable tray on the cable chain holders and attach it using 2 cable ties on each.

      Animation

      Make a cross pattern with the cable ties to prevent the cable tray from sliding away.