8. Y-axis Drive & Machine Limits
Step #03 - Attaching the Limit Plates
If you purchased a spoilerboard with your machine, insert 12 sliding nuts on the top slots of each lateral profile (these two slots won't be accessible after you attach the limit plates). If you didn't, ignore this message and start the instructions normally.
List of Components
| Qty | |||
|---|---|---|---|
| Limit plate | Steel 8mm | 4 | |
| DIN912 screw | M6x20 | 16 | |
| Sliding nut | M6 | 24 (spoilerboard only) |
Tools needed
|
Allen Key 5mm |
