7. Y-axis Motor & Pinion Assembly

Step #02 - Attaching the Motors

List of Components

ItemSpecQty
 Stepper motorNema342
 ISO7380 screwM6x258
 LocknutM68

Tools needed

Allen Key 5mm Spanner 10mm

Instructions

  1. Attach the stepper motor on the pinion drive plate, as shown in the animation, using 4 screws and 4 locknuts.
    1. Replicate the same assembly a second time.

      Animation

      Pay attention to the orientation of the motor, the cables should be going upwards.