Artboard 1
Open-Source
Documentation
Troubleshooting
Download Center
Languages
Open-Source
Documentation
Troubleshooting
Download Center
Languages
6. Gantry & Frame Assembly
Home
Documentation
CNC Fab
Assembly Guide
Gantry & Frame Assembly
Step #03 - Attaching the Gantry to the Linear Rails
Step #03 - Attaching the Gantry to the Linear Rails
List of Components
Item
Spec
Qty
Slide Block
H20
4
DIN912 screw
M5x16
16
Tools needed
Allen Key 4mm
Instructions
Slide 2 linear blocks on each side
and position them exactly behind the holes provided for this purpose.
Fully tighten them
using 4 screws each time.
Animation
If you have difficulties putting the linear blocks behind the gantry steel plates, you need to align the gantry perpendicular to the frame.
⟵
Step #02 - Bringing the Gantry on the Frame
Step #01 - Using the Cable Chain Holders as Gantry Support
⟶