6. Gantry & Frame Assembly

Step #01 - Using the Cable Chain Holders as Gantry Support

List of Components

ItemSpecQty
 Cable chain holderSteel 3mm2
 DIN912 screwM6x204
 LocknutM64

Tools needed

Allen Key 5mm Spanner 10mm

Instructions

  1. Attach 1 cable chain holder on each side of the gantry, using 2 screws and 2 locknuts.
    1. The long flat side of the cable chain holder should be facing down.

      Animation

      Make sure that the cable chain holder is perpendicular to the gantry since it will be used to support its weight in the next step.