3. Gantry

Step #02 - Attaching the Angle Brackets (1/2)

List of Components

Item		Spec	Qty (S/M/L)
	Angle Bracket	60	2
	Sliding Nut	M6	4
	DIN912 Screw	M6x16	4
	DIN9021 Washer	M6	4

Tools needed

Allen Key 5mm

Instructions

Slide the sliding nuts into the profile slot.
Place the angle bracket over the profile and use the screws and washers to tighten it.
Repeat these steps on the other side of the aluminium profile

Animation

Make sure the vertical face of each bracket is aligned with the profile.