3. Gantry

Step #01 - Attaching the Rails to the Profiles

List of Components

Item		Spec	Qty
	Alu Profile 6060	1530mm	2
	Sliding Nut	M5	50
	DIN912 Screw	M5x16	50
	Linear Rail	1500mm	2

Tools needed

Allen Key 4mm

Instructions

Slide the sliding nuts into the profile slot. Leave 60mm between each nut (you can use the rail as a visual cue, as shown in the pictures below).
Place the linear rail over the sliding nuts and use the screws to tighten it.
Repeat these 2 steps to have twice the same assembly.

Animation

Use the custom gauge to properly align the linear rail on the aluminium profile.