7. Machine Launch

Step #02 - Placing the Spoilerboard

List of Components

ItemSpecQty
 Sliding NutM636
 ScrewM6x1636
 Spoilerboard/6

Instructions

  1. Insert 3x 2 sliding nuts in the table profiles and place them 14cm apart.
    1. Place the spoilerboard on top, then insert the screws but don't tighten yet.
      1. Measure 1.5cm between the spoilerboard edge and the front of the machine.
        1. Measure 9cm from each side of the spoilerboard to the table profiles.
          1. Make sure it's square before tightening.
            1. Repeat the process for the 5 other spoilerboards and align them on the first one.

              Animation