2. Table assembly

Step #01 - Assembling the Feet

Tools needed

Allen Key 5mm Spanner 10mm

List of Components

ItemSpecQty
SML
 6060 Aluminium Profile830mm2--
 6060 Aluminium Profile1230mm-22
 Foot PlateSteel444
 DIN 912 ScrewM6x16161616
  Sliding nutM6161616
 DIN 9021 WasherM6x12444
 DIN 933 NutM6444

Instructions

  1. Insert the sliding nut in the slot and position the thread as close as possible from the edge of the profile.
    1. Preplace the washer and screw down the M6 foot. Once tight, screw down the nut on the washer.
      1. Repeat the operation for the other side.
        1. Rotate the profile to position its feet horizontally.
          1. Place the custom foot plate as shown in the video.
            1. Secure it with the 4 screws.
              1. Do the same on the other side.
                1. Repeat all those steps to prepare an mirrored second profile.

                  Animation
                  Make sure to position the feet in the correct direction