Laser on Pro / Fab

Step #02 - Interface Plate & Docking Station Assembly

List of Components

ItemSpecQty
 Laser Mounting PlateSteel 3mm1
 Magnetic Docking Station-1
 DIN985 Lock Nut M42
 DIN912 ScrewM4x162

Tools needed

Allen Key 3mm Spanner 7mm

Instructions

  1. Use the 2 screws and locknuts to attach the magnetic docking station to the interface plate.
    1. Make sure the edges of the docking station and the plate are parallel and fully tighten the screws.

      Animation