Laser on Evo
Step #03 - Fixing the Magnetic Docking Station
List of Components
| Item | | Spec | Qty | High-Z |
|---|
| | DIN912 Screw | M4x55 | - | 2 |
| | DIN912 Screw | M4x60 | 2 | - |
| | Spacer | M5x40 | 2 | 2 |
| | Magnetic Docking Station | - | 1 | 1 |
Instructions
- Remove the cover of the magnetic docking station and insert the M4x60 screws inside the 2 holes (use the M4x55 if you have a High-z).
- Place the 2 spacers on the screws.
- Tighten the docking station using the sliding nuts located inside the left profile.
- Pay attention to the alignment of the docking station, it should be parallel with the spindle mounting bracket.
Animation
