2. Assembling the Structure

Step #11

List of Components

ItemSpecQty (S/M/L)
 Connection Plate20804
 Rectangular NutM54
 DIN933 ScrewM5x84

Tools needed

Spanner 8mm

Instructions

  1. Pre-assemble the plate, the nut and the bolt separately.
    1. Slide the pre-assembled plates on the profile as shown.
      1. Tighten the plate to fix its position below the top of the profile (you need some space left for the following steps).

        Make sure you fixed the plates on the correct side of the profiles