1. Final assembly

List of Components

ItemSpecQty 
 ScrewM6x204
 WasherDIN 9024
 Tooth lock washerDIN 9854

Tools needed

Allen Key 5mm

Instructions

  1. Remove the four screws from the machine foot.
    1. Add the connection plate aligned with the screw holes.
      1. Add the washer and the tooth lock washer.
        1. Secure it with the M6 screw.
          1. Repeat steps for all 4 screws.
            1. Slide the lower tube into the 2 round brackets and tighten down hard .
              1. Slide the upper tube with the 2 female pivots aligned onto the 2 male pivots.

                Animation

                Make sure that the brackets are screw down tight.
                For a smoother action : the top male pivot must be the one where the female pivot is resting on.