2. Lower tube

List of Components

ItemSpecQty 
 Galva Tube 1000/Ø27 mm1
 HookØ27mm1
 Pivot (male)Ø27mm2

Tools needed

Allen Key 5mm

Instructions

  1. Slide the hook to the middle of the tube and screw it down.
    1. Slide the 2 female pivots on the tube. One is flush with the top of the tube and the other is 310mm below.
      1. Check for good alignment and tighten down.

        Animation

        Make sure that both male pivots are aligned before tightening down.