9. Cable Management

Step #11 - Closing the Y-axis Cable Chain

List of Components

Item		Spec	Qty (S/M/L)
	Cable sleeve	150mm	1

Tools needed

-

Instructions

Gently bend the cables to make them turn inwards towards the cable chain connector attached to the gantry.
Bring the cables inside the cable chain and close the bridges one by one to secure the cables.
Finally, attach the cable chain to the female connector located on the frame. Again, you can use a screwdriver to help you with this operation.

Drawing

You might have to double the cable ties to properly attach the cables to the lowest holes of the gantry.