6. Y-axis Frame Assembly

Step #01 - Preparing the Side Aluminium Profiles

List of Components

ItemSpecQty
SML
 Alu profile 3060770mm3--
 Alu profile 30601170mm-33
 Sliding nutM6161616
 DIN912 screwM6x16161616
 DIN9021 washerM6x18161616
 Angle bracket6060888

Tools needed

Allen Key 5mm

Instructions

  1. Place 2 sliding nuts on each side of the profile, in both slots.
    1. Place the 2 brackets at the end of each aluminium profile and use 2 screws, and 2 washers to tighten them. The outer faces of each component should be perfectly aligned.
      1. Repeat these steps to have twice the same assembly.
        1. Prepare the 3rd profile with 4 angle brackets as shown

          Animation