4. Z-axis & Spindle

Step #04a - Attaching the AMB Spindle (1)

Instructions for the AMB spindle. If you have a 2.2kW VFD spindle, go to Step #04b.

List of Components

ItemSpecQty (S/M/L)
 AMB spindle support-1
 DIN912 screwM8x602
 LocknutM82

Tools needed

Allen Key 6mm Spanner 13mm

Instructions

  1. Move the steel plate down until the two lower holes become accessible from both sides.
    1. Place the spindle support on the steel plate and tighten it using 2 screws and 2 locknuts.

      Animation

      Make sure that the spindle support is perfectly aligned with the bottom face of the steel plate.