3. Carriage & Gantry Assembly

Step #01 - Attaching the Ballscrew

List of Components

ItemSpecQty (S/M/L)
 Nut offset plate-1
 DIN912 ScrewM5x254

Tools needed

Allen Key 4mm

Instructions

  1. Place the ballscrew nut between the sliding blocks as shown.
    1. Place the Nut offset plate over the ballscrew nut as shown.
      1. Install the X carriage assembly over the sliding blocks and ballscrew nut.
        1. Tighten the ballscrew nut using the 4 screws.

          Animation