5. Z-axis & Spindle

Step #01 - Attaching the Z-axis Ballscrew

List of Components

ItemSpecQty (S/M/L)
 Z-axis spindle plate-1
 Nut Offset-1
 DIN912 screwM5x254

Tools needed

Allen Key 4mm

Instructions

  1. Position the steel nut offsete above the ballscrew nut
    1. Position the steel plate above the the assembly and tighten it using the 4 screws M5x25

      Animation

      Before placing the steel plate, check the orientation of the ballscrew nut housing, it has to be facing up in order to be attached in the next steps.