3. Gantry

Step #04 - Attaching the Gantry (2/2)

List of Components

ItemSpecQty 
 DIN912 ScrewM6x2016
 GantrySteel 10mm2
 Slide BlockW204

Tools needed

Allen Key 5mm

Instructions

  1. Slide two slide blocks on each profile as shown REMOVE THE GREASE NIPPLES
    1. Place the gantry steel part as show and attach it with the 8 screws
      1. Repeat this operation on the other side of the assembly

        Animation

        Do not forget to remove the grease nipples of each slide blocks on the Gantry.