1. X-axis Carriage

Step #01 - Linear Rails Assembly

List of Components

ItemSpecQtyHigh-Z kit
 Alu Profile 3030 240mm2/
 Alu Profile 3030340mm/2
 Sliding NutM588+4
 DIN912 ScrewM5x1688+4
 Linear Rail200mm2/
 Linear Rail300mm/2
 Slide BlockH2022

Tools needed

Allen Key 4mm

Instructions

  1. Slide the sliding nuts into the profile slot. Leave 60mm between each nut.
    1. Place the linear rail over the nuts and use the screws to tighten it.
      1. Slide the bearing block on the linear rail. If you wish to use the grease nipple, it should be facing upward, as shown on the animation and the pictures.
        1. Repeat these 3 steps to have twice the same assembly.

          Animation

          Make sure that the bottom face of the aluminium profile is aligned with the bottom face of the linear rail.