10. Expendable Interface Unit (Add-on)

Step #04 - Cable Management

List of Components

ItemSpecQty 
 HDMI Cable3m1
 USB Extension3m1
 USB cable3m1
 Cable sleeve1m2

Instructions

  1. Attach the USB-A panel mount extension cable to the keypad support plate, using the 2 M3x10 screws.
    1. Bundle the following cables together into the cable spirals: HDMI, USB extension, micro-USB and power cable. Leave about 10cm out of the spiral to be able to connect them to the screen.
      1. Place the cables in the cable trunkings as shown on the photo below
        1. Connect the cable to the Control Unit