1. Table Frame

Step #10 - Assembling the Crosswise Profiles (2/3)

List of Components

ItemSpecQty
 DIN912 screwM6x1616
 DIN9021 washerM616
 Sliding nutM62

Tools needed

Allen Key 5mm

Instructions

  1. Take the previously assembled 6060 profile and place it above the middle of the lateral assembly.
    1. Fully tighten it using 4 screws and 4 washers.
      1. Take 3 crosswise 6030 profiles (1410mm) from the previous steps and place them as shown in the animation.
        1. Fully tighten them using 10 screws, 10 washers and the pre-placed sliding nuts.

          Animation