5. Gantry sides

Step #04 - Assembling the Gantry

List of Components

ItemSpecQty
 DIN 912 ScrewM6x168

Tools needed

Allen Key 5mm

Instructions

  1. Move a gantry side to be able to insert the X-axis profile.
    1. Tighten the four screws to attach the profile on the gantry side.
      1. Insert the Z-axis assembly. Pay attention to its orientation.
        1. Move the other gantry in front of the profile.
          1. Add the last four screws to secure the whole.

            Animation

            Pay attention to the orientation of the Z-axis assembly..