5. Gantry sides

Step #01 - Assembling the Gantry Motors

List of Components

ItemSpecQty
 stepper motor/2
  GT2 Pulley/2

Tools needed

Allen Key 2.5 mm Evo gauge

Instructions

  1. Insert the pulley onto the motor shaft.
    1. Use the custom gauge to set the proper spacing between the motor and the pulley.
      1. Tighten the 2 screws on the pulley.
        1. Repeat this step for the second motor.

          Animation

          Respect the correct orientation & spacing using the custom gauge.