4. Z-axis assembly

Step #08 - Assembling & Placing the Cable Chain Support

List of Components

ItemSpecQty
 Mekanika  plateSteel1
 Cable chain end connectorFemale1
  DIN 912 Screw M4x122
 LocknutM42
 SpacerM6x902
  DIN 912 Screw M6x104

Tools needed

Allen Key 3mm Allen Key 5mm Spanner 7mm PMMA Gauge

Instructions

  1. Place the cable chain end connector onto the Mekanika plate.
    1. Secure it by passing the two M4 screws and tightening the bolts.
      1. On the X-axis carriage, pass through the two M6 screws then add the spacers and tighten.
        1. Secure the Mekanika plate assembly with the two M6 screws.

          Animation