3. X-Carriage Plate

Step #03 - Assembling the X-Carriage

List of Components

ItemSpecQty
  Lock NutM58
 ISO7380 ScrewM3x102
 Mechanical switch/1

Tools needed

Allen Key 2mm Allen Key 4mm Spanner 8mm

Instructions

  1. Bring the two assembled plates together.
    1. Place the eight lock nuts on top of the eight screws.
      1. Tighten down the lock nuts.
        1. Place the limit switch.
          1. Secure it with the two M3 screws .
            1. Adjust the position of the eccentric spacer with the spanner.

              Animation

              Don't forget to turn to adjust the eccentric spacer. They help set the wheels correctly against the railing. The groove must be facing upwards as shown on the picture.